1. Double-sided feeding rack, the main function is feeding .

2. The accumulator is a process of material storage, in order to ensure that the production will not be interrupted; the storage cage is socially dead storage 200 meters away, and the output is maintained for about 5-3 minutes to ensure that a production of the steel belt is completed an effect condition;

3. Molding unit:

The first device in the first section is a five-roller leveling device. After five-roller leveling, it will enter a steel belt press belt; and then enter a forming section, and the front end of the forming section will be rented in seven levels. This arrangement is specifically for thick tubes;

After entering the first forming section, it will enter the guide, and after the guide, it will enter the welding. After the welding is completed, the external scratch treatment will be carried out. 

4. Reserve the galvanizing position according to whether the customer needs zinc supplementation,

5. After that, it will enter the water cooling. Since the high temperature state after welding will easily cause the deformation of the pipe, the cooling water tank is essential.

6. After cooling, it will enter the final forming section, which is the position that determines the shape of the pipe. We use slow forming, round tubes, rectangular tubes, square tubes, and other tube types are slowly deformed through this section.

7. After deformation, it will enter the fixed length, we use the encoder to determine the length;

8. The last link of forming is straightening, which determines the straightness of the pipe, and then enters cutting through a set of auxiliary wheels.

9. All pipes need to be cut after forming, and the cutting can be controlled by computer programming

length.

10.After cutting, the pipe will enter the unloading rack.

https://youtu.be/DqTi1nSM0qw

KINGTECH TUBE MILL CO. LTD

Email: fsyxh10@tubemakingmachine.com

Whatsapp: +86 13336483052